Surface modulated hierarchical graphene film via sulfur and phosphorus dual-doping for high performance flexible supercapacitors

The steam-assistant heteroatoms of sulfur and phosphorus dual-doped graphene film fabricated via an ice-template and thermal-activation approach demonstrates an excellent pseudocapacitive behavior in flexible electrochemical capacitors.     

Enhancement of Nb-doping on the properties of LiFePO4/C prepared via a high-temperature ball milling–based method

Journal of Solid State Electrochemistry - Li1-xNbxFePO4/C has been prepared by wet mechanical stirring–assisted high-temperature ball milling route. Wet mechanical stirring was considered to...     

Validated liquid chromatography–tandem mass spectrometry method for quantification of ticagrelor and its active metabolite in human plasma

A rapid, simple and sensitive LC–MS/MS method was established and validated for simultaneous quantification of ticagrelor and its active metabolite AR‐C124910XX in human plasma. After plasma samples were deproteinized with acetonitrile, the post‐treatment samples were chromatographed on a Dikma C₁₈ column interfaced with a triple quadrupole tandem mass spectrometer. Electrospray negative ionization mode and multiple reaction monitoring were adopted to assay ticagrelor and AR‐C124910XX. Acetonitrile and 5 mΜ ammonium acetate was used as the mobile phase with a gradient elution at a flow rate of 0.5 mL/min. The method was linear in the range of 0.781–800 ng/mL for both ticagrelor and AR‐C124910XX with a correlation coefficient ≥0.994. The intra‐ and inter‐day precisions were within 12.61% in terms of relative standard deviation and the accuracy was within ±7.88% in terms of relative error. The LC–MS/MS method was fully validated for its sensitivity, selectivity, stability, matrix effect and recovery. This convenient and specific LC–MS/MS method was successfully applied to the pharmacokinetic study of ticagrelor and AR‐C124910XX in healthy volunteers after an oral dose of 90 mg ticagrelor.     

Molecular-Based Design of Microporous Carbon Nanosheets

Microporous carbons afford high surface areas, large pore volumes, and good conductivity, and are fascinating over a wide range of applications. Traditionally synthesized microporous carbon materials usually suffer from some limitations, such as poor accessibility and slow mass transport of molecules due to the micrometer-scale diffusion pathways and space confinement imposed by small pore sizes. Two-dimensional microporous carbon materials, denoted as microporous carbon nanosheets (MCNs), possess nanoscale thickness, which allows fast mass and heat transport along the z axis; thus overcoming the drawbacks of their bulk counterparts. Herein, recent breakthroughs in the synthetic strategies for MCNs are summarized. Three typical methods are discussed in detail with several examples: pyrolysis of organic precursors with 2D units, a templating method that uses wet chemistry, and the molten salt method. Among them, molecular-based assembly of MCNs in the liquid phase shows more controllable morphology, thickness, and pore size distribution. Finally, challenges in this research area are discussed to inspire future explorations.     

Micro-/Mesoporous conjugated polymer based on star-shaped triazine-functional triphenylamine framework as the performance-improved cathode of Li-organic battery

A novel organic conjugated polymer based on star-shaped triazine-functional triphenylamine framework poly[1,3,5-tris(4-diphenylamino-phenyl)triazine] (PTDAPTz) is designed and synthesized successfully by FeCl₃-catalysted chemical oxidative polymerization. The polymer PTDAPTz powder exhibits a compactly packed pleated skirt shape-like morphology with a high surface area (~930 m² g⁻¹) and a bimodal pore size distribution ranging from micropores (~0.55 nm) to small diameter mesopores (~2–6 nm). As explored as the cathode material, the obtained PTDAPTz presents the double charge–discharge process characteristics of both the free radical redox of triphenylamine unit and the bipolar redox of triazine unit in the polymer and a well-defined multistage charge/discharge voltage plateau (~3.8 V for p-doped and ~2.0 V for n-doped) during the charge–discharge process. Also, the PTDAPTz demonstrates an improved capacity (stabilized at 123 mA h g⁻¹ until 50th cycle) and the enhanced rate performance compared to polytriphenylamine (PTPAn). Specially, the discharge curve for the part of triphenylamine unit presents an obviously improved discharge plateau (~3.8 V for PTDAPTz compared to ~3.6 V for PTPAn) due to the electron-withdrawing effect of the triazine unit to triphenylamine. The elaborate structural design and created micro-/mesoporous morphology with the double charge–discharge process make PTDAPTz a potential candidate as the performance-improved cathode of Li-organic battery. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2574–2583     

Color tuning of up-conversion emission in ytterbium,erbium, aluminum tri-doped zinc oxide crystal by adjusting aluminum concentration

Ytterbium, erbium, aluminum tri-doped zinc oxide crystal was synthesized, which can turn color from red to green up-conversion luminescence through adjusting aluminum content. When the aluminum concentration reached 4?mol%, the color of up-conversion emission first turn from red to green. Meanwhile, the ratio of red to green emission reduced from 25.32 to 0.26, and the coordinates of chromaticity coordinate calculation changes from (0.5749, 0.3378) to (0.2190, 0.7169) with aluminum concentration range from 0 to 4?mol%. The up-conversion emission peaks at 521, 542, and 660?nm of sample originate from the transitions of ²H_11/2 → ⁴I_15/2, ⁴S_3/2 → ⁴I_15/2, and ⁴F_9/2 → ⁴I_15/2 of erbium ions, respectively. X-ray diffraction patterns perform the better crystallization degree with increasing aluminum concentration. The scanning electron microscopy images show the porous and lamellar structures with different aluminum concentrations. A convenient but effective design to obtain ytterbium, erbium, aluminum tri-doped zinc oxide up-conversion luminescence is reported, which can turn color from red to green.     

Electrospinning Fabrication of SrTiO3 Nanofibers and Their Photocatalytic Activity

Russian Journal of Physical Chemistry A - SrTiO3 nanofibers were fabricated by an electrospinning process. The phase, microstructure and photocatalytic activity of the obtained SrTiO3 nanofibers...     

Potential influence on drug efficacy from interaction of tartrazine and trypsin

The extent to which drugs combine with trypsin is influenced by the interaction of tartrazine and trypsin, which may cause overdose or underdose of drugs. Therefore, the interaction of tartrazine and trypsin is investigated by methods of spectrometry in this paper. The binding rate of tartrazine to trypsin is 80.95–95.71% at 310?K, and Hill’s coefficients are almost 1. The effect of tartrazine on trypsin structure was studied by synchronous and circular dichroism. The results showed that the binding of tartrazine and trypsin induced the conformational change of trypsin, and quenched the endogenous fluorescence in trypsin. The results of molecular docking revealed that tartrazine is located in the catalytic active site of trypsin, and is consistent with that of experimental calculation.     

The enhanced biological activities of three Zn (II) complexes based on different 1,2,4‐triazole fungicides

In order to screen effective fungicides, three Zn (II) complexes, [Zn L ¹ ₄ (NO₃)₂]·2H₂O·2EtOH ( 1 ), [Zn L ² ₄ (NO₃)₂] ( 2 ), and [Zn L ³ ₄ (DMF)₂](NO₃)₂ ( 3 ), ( L ¹  = paclobutrazol, L ²  = diniconazole, and L ³  = hexaconazole), were synthesized and characterized by elemental analysis, FT‐IR spectroscopy, and single‐crystal XRD. The antifungal activities of these complexes were then evaluated against four selected fungi using the mycelial growth rate method. The resulting data indicate that all the complexes show the enhanced antifungal activities than the corresponding ligand and mixtures. And, the interactions between the metal salt and ligands in the three complexes seem to be synergistic. According to the study of the influence of the structures on the activity, complex 2 with C=C linkage and 2,4‐dichlorophenyl moieties enhances the bioactivity significantly, especially against Wheat gibberellic ( II ). Density functional theory (DFT) calculations were carried out to help explain the enhanced bioactivity of the Zn (II) complexes. Meanwhile, all complexes are excellent grow‐regulators, especially complex 3 . The resulting data show that the complexes based on triazole fungicides have the potential applications in agriculture.